Dji Assistant 2 Mac Download Problems Updated

Dji Assistant 2 Mac Download Problems

djiuser_M3diKNv6RUAI Posted at 4-20 15:24
I have tried every possible angle to get this to work and notwithstanding zero. Very frustrating. Also the reason I tried to get down the assistant route is because my compass keeps needing calibration, follow the app directions and horizontal works every fourth dimension but vertical never works. Result is no flying.

Oh and as well....Tried the Horndis workaround that the DJI person posted and although it loaded it nonetheless doesn't piece of work

2020-iv-20

Use props

SamKrieg Offline

See details

SamKrieg

lvl.1

Flight distance : 52949 ft

Switzerland

Offline

djiuser_M3diKNv6RUAI Posted at 4-xx fifteen:24
I have tried every possible angle to become this to work and notwithstanding nada. Very frustrating. Too the reason I tried to go down the assistant road is because my compass keeps needing calibration, follow the app directions and horizontal works every time but vertical never works. Result is no flying.

The workaround really works - I tried again with some other another cable and now everything is fine.

2020-4-21

Use props

Snopmaster Offline

See details

Snopmaster

lvl.3

Flight distance : 140043 ft

Norway

Offline

I tin't either export fly data - have MacOS Catalina x.15.4

2020-4-22

Use props

DJI Mindy Offline

See details

DJI Mindy

Administrator

Flight distance : 7 ft

Offline

SamKrieg Posted at 4-21 04:55
The workaround actually works - I tried again with another another cable and now everything is fine.

Good to know it works in the end, prissy try, promise you enjoy flying.

2020-4-23

Use props

fans42ea14a8 Offline

See details

fans42ea14a8

lvl.1

Offline

irresolute to a different cable worked for me

2020-4-25

Employ props

txcheffy Offline

See details

txcheffy

lvl.1

U.s.a.

Offline

This couldn't be more than frustrating.  Tin can someone send me instructions how to update my controller and mavic on MacBook

2020-4-25

Use props

RicPDX Offline

See details

RicPDX

lvl.ii

Flight distance : 35774 ft

  • >>>

The states

Offline

Please PM me the fix for this. Information technology is rather urgent. Thank you.

2020-4-27

Use props

TVDH Offline

See details

TVDH

lvl.one

Australia

Offline

DJI Mindy Posted at 2-24 20:11
The woraround has been posted in 2#, please take a try, distressing for the inconvenience caused.

Mindy, that is not the trouble.  the HoRNDIS installs fine, merely if you lot so showtime DJI Assistant 2 THAT gives the message "Device non supported. please download the right dji assistant...." when yous connect the Mavic.  so the problem seems to be with the DJI Assistant 2...

2020-five-10

Utilize props

Gizmodude Offline

See details

Gizmodude

lvl.2

Flying distance : 49213 ft

  • >>>

Canada

Offline

MDSimpson Posted at 1-30 17:54
I but downloaded the DJI Assistant two Mavic version, information technology installed without result on my 2009 MacPro running OS Catalina (high spec machine, 64Gb RAM, dual 3.3Ghz CPU'south, 8Gb Radeon RX560 GPU, 512Gb SSD). Nevertheless, the Mavic Mini wont connect. Even Unplugging the device, reboot information technology and reconnecting within 20s. I know information technology is connected as the drive comes up in Finder. I have turned off, Google Sync fill-in, so it no longer opens when I connect a USB device. I have also renamed the Mini in Disk Manager as there was no proper noun. Tried rebooting it all, after all these setting changes, however nothing. What else can we do to get this working, please? FYI, the drone will not turn on with the USB cabled connected..

This is what worked for me...
ane) Launch DJI Assistant 2 for Mavic
ii) Remove the Micro SD Carte from the MINI & gimbal comprehend ( DOH , yeah I know I just had to put that in there )
3) Make certain your battery is at to the lowest degree 50% or more
4) Power on the Mini and AS SOON as you lot hear the start of the startup chime on the MINI plug in the MicroUSB connection and give it a few moments to paw-shake and connect..
five) if step iv fails , power off the Mini and repeat Step four ( DJI says 20sec , you really have to do it within 5 seconds ! )

Thank you and skillful luck

2020-5-13

Utilize props

Gizmodude Offline

See details

Gizmodude

lvl.ii

Flying distance : 49213 ft

  • >>>

Canada

Offline

DJI Mindy Posted at 2-24 20:08
Since and then may customers have the same problem with the Mac Os Catalina, I volition mail service the workaround in public.
Delight click Quit when the Mac pops up HoRNDIS is non compatible, exit the installation of the driver, then download the driver installation packet beneath separately, and so double-click the PKG file to install information technology later decompression. Afterward the installation is successful, it should be used normally.
https://github.com/jwise/HoRNDIS/files/3719733/HoRNDIS-ix.2-catalina_install.pkg.zilch

Likewise it'due south of import to note ..

one) Remove Micro SD bill of fare from Mavic Mini ( as sometimes the MAC OS volition desire to read the SD card and this interrupts the DJI Assistant from communicating to the drone.
2) Make sure your bombardment is at least 50% & remove gimbal cover ( yeah DOH , but its worth mentioning )
3) Launch DJI Assistant 2 for Mavic with USB cable plugged into computer
4) Power on your Mavic Mini and immediately when you hear the start upwardly tone on the Mini plug that mircoUSB cable in.
5) Let the DJI Assistant to handshake with the Mini ( may take a few moments , be patient )
half-dozen) if this fails , ability OFF the Mavic , unplug the Micro USB from it . Try Step #4 over again. You have to be quick to plug that micro USB cable into the Mini. ( Inside 20seconds should be more like within 5 seconds)

Thanks and good luck

2020-5-13

Use props

DRAir Offline

See details

DRAir

lvl.ii

Flight distance : 3927707 ft

United states of america

Offline

Worked fine more me on my MacBook Pro yesterday

2020-5-14

Use props

Mikael (Sweden)

lvl.four

Flight distance : 350627 ft


Sweden

Offline

Dj Assistant 2 is easy to install to Catalina. Download the software and install it, if y'all go a problem installing it yous go into settings on your Mac and choose security and integrity. In there you lot will find that the software is blocked from install, klick on let to run the installer and your sett to go. Its a security with many programs you can bypass with this easy handle.

2020-5-14

Apply props

2niner2photo

lvl.1

United States

Offline

I have tried the fix in post #2 with no success and have tried multiple cables. Trying to update a Phantom 4 Pro two.0 with a MacBook Pro. Any assistance would exist greatly appreciated!

2020-five-18

Use props

fans5408bf0a Offline

See details

fans5408bf0a

lvl.1

Flight distance : 157103 ft

United States

Offline

FYI, I had no problem with Catalina and Assistant 2 as of yesterday 19MAY2020.

2020-5-19

Use props

fans5408bf0a Offline

See details

fans5408bf0a

lvl.1

Flight altitude : 157103 ft

United states of america

Offline

FYI, I had no problem with Catalina and Assistant ii as of yesterday 19MAY2020.

2020-5-19

Apply props

Cameraman Steve

lvl.1

United States

Offline

Do you have the latest version V208?

2020-5-19

Employ props

fans802129af Offline

See details

fans802129af

lvl.1

Flight altitude : 10033 ft

Netherlands

Offline

DJI Mindy Posted at ii-24 20:08
Since so may customers have the aforementioned problem with the Mac Os Catalina, I will post the workaround in public.
Please click Quit when the Mac pops up HoRNDIS is not compatible, exit the installation of the commuter, then download the driver installation package beneath separately, and and so double-click the PKG file to install it later on decompression. Afterward the installation is successful, information technology should be used ordinarily.
https://github.com/jwise/HoRNDIS/files/3719733/HoRNDIS-ix.2-catalina_install.pkg.zilch

I can not install your HoRNDIS/file because I get the same message that information technology tin can not be installed.
Is there whatsoever solution yet?

2020-5-xx

Utilise props

fans802129af Offline

See details

fans802129af

lvl.1

Flight distance : 10033 ft

Netherlands

Offline

Covert23 Posted at 4-10 17:38
so, i did this .. istalled the HoRNDIS 9.2, restarted, then tried to re-run the dji assistant .pkg file . . and at the stop it says i need to install the HoRNDIS file . . . which I had already done! So I'1000 not sure how to go along. Does ANYONE have a good, CLEAR step--by-step guide to do this? I have both .pkg files -- DJI Assistant and HoRNDIS ix.2 -- sitting in my downloads folder.

Aforementioned here..:-(

2020-v-20

Utilise props

djiuser_X10TgsGUsm9V

New

United Kingdom

Offline

DJI Mindy Posted at 2-24 20:08
Since so may customers have the same problem with the Mac Os Catalina, I will postal service the workaround in public.
Please click Quit when the Mac pops up HoRNDIS is not compatible, exit the installation of the driver, then download the commuter installation package below separately, and then double-click the PKG file to install it after decompression. After the installation is successful, information technology should exist used usually.
https://github.com/jwise/HoRNDIS/files/3719733/HoRNDIS-nine.2-catalina_install.pkg.nil

Hullo, I had no problems and sorry for hijacking the thread. It works simply fails to upgrade the firmare which is available to install, controller washed, mavic 2 pro failing at 80%, also failing to download the logs to establish why. Whatsoever hints? Cheers

2020-5-twenty

Use props

djiuser_irBOnIzr1zVs

New

United States

Offline

I am able to connect to my controller but not the Mavic Air 2 itself. I have followed the install of the pkg from post #ii and still no connexion. Tried ii dissimilar USB-C cables and all 4 USB-C ports on my MBP. No dice. Very frustrating. The DJI chat session ended with the recommendation that I send the drone I unboxed 3 hours agone dorsum into them to figure information technology out. That is ridiculous.

2020-5-20

Utilize props

djiuser_yN6fxvUMwBno

lvl.1

Canada

Offline

Assist! i'm having a actually hard time trying to install  the Banana Pro Firmware for the DJI Ronin Due south.
I read some messages online and obviously The App is incompatible with Catalina. Can someone please help me resolve this please

2020-5-27

Utilise props

djiuser_yN6fxvUMwBno

lvl.one

Canada

Offline

djiuser_FsdKB1AV0bNY Posted at 1-xviii fifteen:41
Would you mind sending me the respond likewise if you actually have one??  And what'southward the signal of a forum if we're non sharing the answers??

Aid! i'm having a really hard time trying to install  the Assistant Pro Firmware for the DJI Ronin S.
I read some messages online and apparently The App is incompatible with Catalina. Can someone delight assistance me resolve this please

2020-5-27

Utilise props

djiuser_cU8x9IKe4Qc6

lvl.i

Usa

Offline

DJI Mindy Posted at 2-24 20:16
Hi Jeff402, we are terribly sorry for the unpleasant experience, I take posted the workaround in 2# and nosotros will also make certain this resolution has been spreaded to our support squad.
Please keep u.s. updated if you accept whatever other concerns.

A better solution would be to update the DJI installer so that it has the latest version of HoRNDIS.

2020-6-21

Use props

krisd Offline

See details

krisd

lvl.one

Belgium

Offline

I've the same problems. is information technology possible to send me the answer besides. thx

2020-6-21

Use props

MateuszManaj Offline

See details

MateuszManaj

lvl.1

Poland

Offline

aforementioned problem. Send me an reply too

2020-6-23

Apply props

martin.grosymail.com

lvl.3

Flight distance : 1017871 ft

Canada

Offline

DJI Mindy Posted at 2-24 twenty:09
Please bank check my post in 2#.

Did the workaround many time, this doesn't work at all.
Delight suggest, can't utilise DJI banana 2, the app won't load at all.
Demand to practise a clean install of my faulty Mavic 2...

This is beyond stupid.

2020-6-29

Utilise props

TheOriginalMan

lvl.one

Flight altitude : 100807 ft

United States

Offline

djiuser_irBOnIzr1zVs Posted at 5-20 16:06
I am able to connect to my controller but not the Mavic Air 2 itself. I accept followed the install of the pkg from post #2 and still no connectedness. Tried ii different USB-C cables and all four USB-C ports on my MBP. No dice. Very frustrating. The DJI chat session ended with the recommendation that I send the drone I unboxed three hours agone dorsum into them to figure it out. That is ridiculous.

i have this same issue with my 2 mean solar day old drone! has in that location been any resolution for you??

2020-6-30

Use props

enzosolazzi Offline

See details

enzosolazzi

lvl.two

Argentina

Offline

DJI Mindy Posted at 2-24 20:08
Since and then may customers accept the same problem with the Mac Os Catalina, I volition post the workaround in public.
Delight click Quit when the Mac pops up HoRNDIS is not uniform, exit the installation of the driver, then download the driver installation package below separately, and and so double-click the PKG file to install it after decompression. After the installation is successful, it should be used normally.
https://github.com/jwise/HoRNDIS/files/3719733/HoRNDIS-9.ii-catalina_install.pkg.zip

Swell works ok! thanks

2020-seven-1

Use props

cjsutcliffe Offline

See details

cjsutcliffe

lvl.1

Flight altitude : 15830 ft

United Arab Emirates

Offline

djiuser_irBOnIzr1zVs Posted at five-xx 16:06
I am able to connect to my controller merely non the Mavic Air 2 itself. I have followed the install of the pkg from mail service #ii and however no connectedness. Tried 2 unlike USB-C cables and all four USB-C ports on my MBP. No die. Very frustrating. The DJI chat session ended with the recommendation that I transport the drone I unboxed iii hours ago back into them to figure it out. That is ridiculous.

same situation with my MA2 and macbook pro- sees the controller, just not the drone... not good for a 1 day old device...

2020-7-iv

Utilize props

Mike Collins Offline

See details

Mike Collins

New

The states

Offline

This is unreal. My first MA2 was dead out of the box. My 2d can't connect to my computer. This is my showtime drone. Should have gone (err now go?) with a company who knows how to brand working products?

2020-vii-12

Use props

Air805 Offline

See details

Air805

lvl.ane

United States

Offline

I have the same issue and without a resolution volition have to go with another manufacturer.

2020-7-14

Use props

pingo Offline

See details

pingo

lvl.2

Flight altitude : 15285 ft

Germany

Offline

I tried to connect my PT2-Software to my phantom 2. With Catalina the Software is not finding the Phantom 2.

"Please connect to the controller"   only the USB-Cablevision is continued and the phantom ii is on...

Is your driver download besides working in this case? Cheers

×

2020-7-15

Use props

pingo Offline

See details

pingo

lvl.2

Flight distance : 15285 ft

Germany

Offline

I can now connect, subsequently changing te USB Cable. Problem solved

×

2020-seven-fifteen

Use props

Air805 Offline

See details

Air805

lvl.1

United States

Offline

diana2020 Posted at ane-21 03:47
I have the same trouble. Please can y'all send it to me as well.

Besides I'thou having difficulties downloading my images onto my figurer what tin I practise?


I'k having the aforementioned probs in trying to link to my Mac or iphone- did DJI transport a solution?

2020-7-eighteen

Use props

Air805 Offline

See details

Air805

lvl.ane

U.s.a.

Offline

Snopmaster Posted at four-22 02:55
I can't either export wing data - have MacOS Catalina 10.fifteen.4

[view_image]


Same here- have yous fond a piece of work-effectually?

2020-7-18

Apply props

Max13 Offline

See details

Max13

lvl.2

Guadeloupe

Offline

I have tried the latest DJI Banana two (2.0.12), together with the latest Horndis (9.2), on a Macbook Pro with Catalina (10.15.6)

I was going crazy trying to get it to work - even though installs of both the dji assistant 2 and horndis claimed to have installed correctly, and I rebooted, I yet could not get it communicating using my usbc-usbc cablevision to the dji smart controller (or any dji device)

and in the end I found I could only get it to piece of work was using a usbc to usb a adaptor connected into the macbook pro, with an onetime fashioned usb a to usb c cable (and not a new usb-c to usb-c cable), and that my existing (and several) usb c to usb c cables, would not work at all.

probably its a horndis commuter outcome.  maybe it doesn't back up usb c.

but why dji should rely on horndis is beyond me.

-- Jez

2020-7-25

Use props

fansd137a815 Offline

See details

fansd137a815

lvl.1

Flight distance : 510863 ft

United states of america

Offline

DJI Mindy Posted at ii-24 20:xi
The woraround has been posted in 2#, please accept a try, sorry for the inconvenience caused.

I'grand having a trouble getting Assistant two to recognize my Macic Pro. How can I become to your work around on #two?

2020-8-3

Use props

Rootbeer Offline

See details

Rootbeer

lvl.1

Flying altitude : 639245 ft

United states

Offline

DJI Mindy Posted at 2-24 twenty:08
Since so may customers accept the aforementioned problem with the Mac Bone Catalina, I will post the workaround in public.
Please click Quit when the Mac pops upwardly HoRNDIS is not compatible, exit the installation of the driver, then download the commuter installation package below separately, and then double-click the PKG file to install it subsequently decompression. After the installation is successful, information technology should be used normally.
https://github.com/jwise/HoRNDIS/files/3719733/HoRNDIS-9.ii-catalina_install.pkg.zip

Mindy, This is not working for me. I accept now washed it x times

2020-viii-5

Utilise props

simonak Offline

See details

simonak

lvl.i

Ireland

Offline

Im non happy , why on earth practice I demand to teather my phone to my Mac to install the software? I found this folio-and other unhappy people, I tried the manual install of the drivers in post2 hither, Information technology crashed my mac when I turned on teathering. Even after the drivers in post ii and reinstalling DJI assistant i yet get the 2nd pop up for installing HoRNDIS - at that place is no application installed?
Does DJI or anyone else take a solution for getting the software working on my Imac 10.fourteen.6 ?

2020-8-10

Use props

Mikael Sweden

lvl.4

Flight distance : 350627 ft


Sweden

Offline

There are no problem to run DJI Banana ii on Catalina. The problem you mostly volition run into after install is that information technology not work. Easy to go into settings and Security and Integrity. You will find that the app is blocked and you lot click allow and it volition run.

2020-8-11

Use props

Dji Assistant 2 Mac Download Problems

Posted by: huntersenter1998.blogspot.com

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel